*** DISCONTINUED *** AFL LightLink 24 Slim-Line Pedestal - Empty

The LightLink (LL) 24 Pedestal provides an easily accessible solution for splicing underground fiber cable, branches and drops. The pedestal may be buried up to the burying guide lines located on the pedestal base. With the capability to hold up to three Apex™ X-2 Splice Trays, the LL-24 pedestal is capable of up to 216 single fusion, 432 mass fusion with standard ribbon, or 864 mass fusion with “rollable ribbon” fiber types such as AFL’s SpiderWeb Ribbon® (SWR®). One side of the pedestal may be used for splicing optical fibers while the opposite side may be used for copper splicing of branch or drop cables.

Splice Trays and Splice Modules

The LL-24 Pedestal utilizes X-2 size splice trays. Trays can be ordered fully loaded or half loaded with splice modules. For “rollable” type ribbon such as AFL’s SpiderWeb Ribbon, trays can be fully loaded for 24 mass splices or 288 fibers per tray. For standard ribbon, AFL recommends half loaded for 12 mass splices single-stacked, or 144 fibers.

• Easily installed in traditional buried pedestal applications
• All cable routing, retention, mounting and grounding accessories included
• Holds up to three (3) Apex X-2 splice trays (not included)
• Fiber routing rings allow for easy storage and maintenance of the buffer tubes and using tie-wraps, copper pairs may be secured to the mounting plate
• Defer deployment cost – open buffer tubes when access to fibers is required
• Standard 216-tool or similar tool required to remove the dome

Height to Ground Line: in (cm) 30.2 (77.5)
Total Height: in (cm) 40.2 (102.1)
Inner Diameter: in (cm) 7.8 x 6.0 (19.7 x 15.2) Oval
Splice Capacity: Single (216), Mass (SWR) (864), Mass (Standard) 432
Splice Tray Capacity: 3